Leather Lacquer Finish

Used to replace the lacquer leather finish that has been removed from your leather or to seal in new colour.

Replaces the lacquer leather finish coating on leather that has come off in a beautiful leather finish in:
• Gloss
• Satin
• Matt

Product Details

Lacquer Leather Finish


Lacquer Leather Finish PU Lacquer Top Coat Sealer
  • Comes in Gloss, Satin or a Matt finish.
  • New improved version
  • Higher waterproof properties
  • Higher UV protection
  • Just spray it on if using an airbrush
  • Simple and easy to apply with a sponge
  • Available ready to use

An extremely hard wearing and scuff resistant PU Lacquer Leather Finish. Lacquer Leather finish is a clear coat sealer / lacquer designed to be applied over the top of the Leather colourant, to seal in the top coat, giving the finish an extremely hard wearing surface, protecting it from grime, stains and dirt.

Easy to apply with a sponge or spray application, with amazing results, producing a beautiful Lacquer Leather Finish.

· Very Hard Wearing – Seals colour in, more importantly holds it there!
· Extremely flexible giving a natural soft touch.
· Clear finish comes in a matt and gloss or satin, this then enables you to mix to any finish desired
· Water Based – Non Hazardous & Non Flammable
· Giving a scuff & scratch resistant finish

This clear coat Lacquer Leather Finish has been designed to seal colour in after applying colours to a leathers surface. It also feels soft and natural on the leather, it does not make leather feel and look artificial in anyway. In fact it far improves the touch and texture on leather, achieving a very smooth, soft, silky feel that is very natural and so realistic you won’t be able to tell them apart.

The clear coat Lacquer Leather Finish is an Ideal partner for manufacturers of antique finished leathers. Where the coloured finish is rubbed off to create a two tone effect coloured look and finish.

Instructions

The clear coat lacquer leather finish is an extremely flexible clear coating that is applied to your leather after carry out a colour repair.

Its very easy to apply, this can be done with a sponge so anyone wanting to carry out a diy leather repair job at home can do this quickly and easily. You just dab on the clear coat lacquer being careful not to overload the sponge so not to create a froth on the surface.

Apply three coats allowing to dry between each coating, you can speed this up with a hair drier.

On the second coating lightly sand with 7000 grit paper to give a silky feel to the leather before apply the third coating of the satin leather finish.

If you wish to spray this on, this can be done keep the spraying pressure down to about 15psi, and spray about 12 to 15 inches away from the surface.

Spray in even over lapping motions, ensuring you have covered the area fully, dry with a hair drier between coats.

When the second coating is dry lightly sand this with 700 grit paper to produce a luxurious soft finish that looks just stunning.

Your Name (required)

Your Email (required)

Subject

Your Message

//]]>