Heavy Filler

Heavy Filler – Is Flexible – Hard Wearing

It is designed to fill in scuffs, scrapes and holes in leather, being colour charged it enables a perfect repair to be carried each and every time.
Dries quickly and you can speed this up by using a hair dryer.

Product Details

Heavy Filler

Heavy Filler Coloured Repair Compound
  • Easy To Use
  • Very Flexible
  • Coloured Filler
  • Fills holes, cracks and scuffs
  • Durable

The Coloured Heavy Filler is a unique Repair Compound used to fill in surface abrasions, scuffs and holes in leather.

Heavy filler is designed for use in high wear areas, like seat bases, cushions, car seat bases, car seat bolster, arms of chairs and sofas etc It’s a thick coloured paste and so it can be easily rubbed into the leathers damage, allowing it to hold the leather fibres tightly together creating a strong repair as well as a smooth one.

You can also mix the Leather Colourant with this filler to match the leather colour making the repair better and enabling you to get a better more invisible finish.

The filler repair compound, produces a natural look and feel, can be grained by stippling the filler on, creating an uneven finish, then lightly sanded back and coloured over the top.

The heavy filler has excellent adhesion properties, wont shrink, crack or peel off, once applied correctly, its thick viscosity and has an excellent shelf life.

The Coloured Heavy Filler has a flexible finish so it won’t crack. It may need several applications to ensure of a perfect repair.


Clean the area first of all to be repaired with a leather cleaner.

If you are having to re colour the area as well, now is the time to use the leather prep to prep all the area, making this good to carry out any colouring that you will be doing.

At this stage you need to put in your sub patch if you going to fill a hole. If you are just repairing scratches, scuffs or cat scratches, skip the prep section and start applying the heavy filler to the areas needing repair, it may be best to build up the layers of heavy filler, drying between each layer to ensure for a perfect repair.

You can dry the filler with a hair dryer and this can be sanded down with sandpaper anything from 1200 grit to 320 grit depending on how much filler has been used and how bad the area was that’s being repaired. Once the filler has dried proceed to colour over this to seal this in place, to avoid coming off.

Then your ready for application of the leather colours / leather dyes.

Your Name (required)

Your Email (required)


Your Message